Basler acA1920-155um
▪Monochrome.
▪Interface: USB 3.0. A separate PCIe USB 3.0 interface board is required.
▪Sensor: 1/1.2” CMOS.
▪Cable length: 3 m (standard) or 20 m (with powered extension cable, not tested).
▪Maximum number of cameras: 1.
▪Recommended color space in EthoVision XT: Y800.
Tested configurations with 1 camera
|
Computer |
Operating |
Resolution (WxH) |
Frame rate |
Duration |
DL or C |
|
Desktop Dell Precision 3680 |
W11 |
1920 x 1200 |
60 (DS) |
12 |
DL |
|
Laptop Dell Precision 3591 |
W11 |
1920 x 1200 |
25 (DS, DF) |
12 |
DL |
notes
▪Detection method used: Dynamic subtraction (DS) or Differencing (DF). Missing samples 0.0%.
▪Body point detection technique: DL = Deep learning, C = Contour-based.
▪Desktop: Dell Precision 3680, Graphics card NVIDIA T1000 8 GB. The camera was connected through a Basler USB 3.0 PCIe Interface card.
▪Laptop: Dell Precision 3591, Graphics card NVIDIA RTX 1000. The camera was connected through a USB 3.0 port on the motherboard.
▪For deep learning see also GPUs tested and supported.
See also